Tamiya mini 4WD track - Corner with vertikal displacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update 18-5-2025 Addon track Rz with 1/4 dY. Use four pieces to get a total vertical offset of 1 track.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is fully based on the already issued mini 4WD track.
2025-05-18: Updated due to incorrect files; both left files were identical.
These track parts are corner parts with a radius of 359/486 mm (TZP) around the Z_axis.
Every corner pieces changes the Z-position of the track by 19mm, which is ¼ of the standard Z-height of 76 mm. So for a Rz359 90 degrees corner four tracks are required, this also brings the track one track higher in such a way that the tracks can be stacked. For the Rz486 track also 4 tracks are required, add 2 normal Rz 486 tracks for a 90 degrees corner.
Use items from the original track model to connect the tracks.