Xiaomi Imilab webcam mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Webcam mount reusing parts of the original supplied mount screws. Used in my LACK enclosure build.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Choose either Wall or Leg Connect. Cam holder and Nut fit both (snug fit btw).
On your Imilab webcam, pull out the rubber caps from the hinge at the base of the webcam, then use a small Philips screwdriver to unscrew the hinge screw.
Reuse these parts to attach the Cam Holder to your Imilab.
To secure the Cam Holder with the Nut to either Wall or Leg Connect, simply use a 20mm M3 bolt and hexagonal nut (that fits inside the Nut).
Now you can attach the entire setup to your desired surface using standard 3,5mm screws.