OnePiece_Robin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: Robin.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 157x235mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA 3DHoJor Blue Transmission Distance: 2.9
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Misletoe Green Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Sunlu Cyan Transmission Distance: 0.1
This print uses 8 unique filaments, other brand of filaments with similar TD should work as well.
Swap Instructions (for 1 AMS):
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Blue (Slot2)
At layer #8 (0.72mm) swap to White (Slot3)
At layer #11 (0.96mm) swap to Red (Slot4)
Pause at layer 13 to allow color swap in Slot 1 and 2:
Slot1: Black --> Yellow
Slot2: Blue --> Misletoe Green
At layer #14 (1.2mm) swap to Yellow
At layer #17 (1.44mm) swap to Misletoe Green
At layer #20 (1.68mm) swap to White
Pause at layer 26 to allow color swap in Slot 1 and 2:
Slot1: Yellow --> Beige
Slot2: Misletoe Green --> Cyan
At layer #27 (2.24mm) swap to Beige
At layer #29 (2.4mm) swap to Cyan
At layer #30 (2.48mm) swap to White for the rest.