1 / 1
Garmin Panoptix Live Scope Transducer Tripod and Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this Tripod and Clip in order to support the transducer when ice fishing.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 0
- Views
- 1,669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Public Domain
I printed these in PLA at 20% infill at 0.2 layer height. You will have to use screws to attach the legs to the base of the tripod and a screw so that the clip can hold correctly.
You may have to scale the model up as I had to after exporting the files. The following is what I scaled it to.
Base Tripod=Scale the Z axis to 12.7 mm and turn Uniform Scaling on
Tripod Leg=Scale the X axis to 200 mm and turn Uniform Scaling on
Clip=Scale the Z axis to 12.7 mm and turn Uniform Scaling on