1 / 3
Soup Can Lid with Slot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits over a Campbell's soup can I use to recycle spent razor blades. Could be used for coin collection too.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Fits over a Campbell's soup can I use to recycle spent razor blades. Could be used for coin collection too. The can measured just under 80mm in diameter at the lip, so this is a perfectly snug fit.
Print instructions
Category: Containers Print Settings
Printer Brand: Anet
Printer: A8
Supports: Doesn't Matter
Resolution: .2mm
Infill: 10
Filament: Shaxon PLA Red
Notes:
Default orientation in the file puts the top of the lid against the bed. This was fine for me, but if you want to print it flipped over, it'll probably need supports.