1 / 7
Ridgid Einsy Case | Reversed, Covered Wires, MMU2S, More Airflow, Hole For LEDs, PiZero2 Frame, Clears X Axis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Ridgid Einsy Case, with screws from Cabelbox Enclosure to secure to frame and a Pi Zero 2 Frame.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 1
- Views
- 729
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Will flesh out a better description later.
- Added hexagon mesh to base to look cooler.
- Added small hole on top for DC wire to power led lights.
- Remixed Pi Zero cover to have hexagon mesh.
- Fixed thin walls in top of base (around where extruder wire comes in).
- Added and modified plastic screws to secure to aluminum extrusion part of the frame.
- Fixed hole on bottom that allows main wires coming in. Now you don't have to take them off of the board. Made hole smaller to keep fingers out.
- Extended edge of base to match the lid height. It does not hit X axis motor.
- Chamfered most outer edges to make it smoother and less sharp corners.
- made led wire hole on top 1mm bigger so the wire will be easier to fit.
- centered the screw a bit better. Part of it was off center by 0.5mm.
- Pi cover is 1mm higher than base. X axis does not touch it.
- Using Pi Zero 2 frame from David linked below.
- Added non “cut out” version of Base file. In case someone didn't want a hole.
- Deleted older files, too many details were fixed.
- Added Base with hole for USB Adapter to Pi Zero 2 mini USB port. This is for a USB camera.
I printed everything in PLA to test the fit. Layer height of 0.3mm, 20% infill is plenty strong enough. Basic Prusa PLA profile.