K2 Plus Build Plate Stop Extenders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slip-on stop extenders to enhance the alignment of the build plate.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 174
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi there! After levelling my heatbed, I noticed that the back build plate stops were a bit short. Sometimes, the build plate would sit on them, causing it to be slightly raised in the back. To solve this, I designed some build plate slip-on stop extenders to enhance the alignment of the build plate. I created three sizes: short, medium, and tall, so you can choose the preferred build plate stop height. If your build plate stops are at different heights after levelling the heatbed, you can mix and match the stop extenders to achieve the desired height. Don't forget to mirror for the opposite side.
Please don't forget to leave a like, Thanks!