1 / 1
BIGTREETECH (BTT) ADXL345 Prusa MK3S+ Bed Mount — image 1

BIGTREETECH (BTT) ADXL345 Prusa MK3S+ Bed Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple mount for the BTT ADXL345 for Klipper

Rating
5 / 5
Likes
46
Downloads
399
Makes
9
Views
1,170
Reviews
7

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This design mounts the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) to the bed of the MK3S+ or any bed that is under 5mm thick. 

Use a shim or thick tape between the sheet and the end of the bolts if you want to prevent marring the sheet.

Stock firmware does not make use of an accelerometer and requires 3rd party firmware such as Klipper.

To assemble you will need four M3 nuts and four M3 screws (8mm seems to be the sweet spot, but you can use shorter for the board and longer for the bed).

Print with a good amount of infill (50%) for rigidity.