1 / 1
GPU Anti-Sag Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For models with offset M3 threaded holes on the front such as the reference AMD Radeon RX 6800 XT
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with fine layer heights to get good threads.
I printed the 80 mm bracket and 70 mm leg. (Threads are M15x1.5 mm pitch.)
Requires two M3 screws (I used M3x6 BHCS).
Please comment if your card is also compatible with this four hole pattern.