1 / 3
Rook 2020 mk2 pinned front idlers/tensioners
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified to use 5x15mm pins instead of bolts.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Modified the stock front idlers/tensioners to use 5x15mm pins instead of bolts.
Pins are captured when in use with no additional parts, and can still be easily removed when there is no tension on the belts.
Use a piece of belt to hold the bearings in place under the large hole and push the pin in. Pull the bearings forward to set the pin into the working position.
To remove, push the bearings out of the working position, and push the pin out from the bottom with a 2.5mm hex wrench of similar.
