5 gallon (19l) water jug cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5 gallon (19l) water jug cap
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 212
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Modified the brilliant original model to make it easier, for me, to screw/unscrew the cap
The water bottles themsleves vary and I found I had to print just the cap for 2 of mine at 101%, I left the collar as is - YMMV
I printed in white ASA, and it does not do overhangs very well - even with supports. So clos-up the top looks a little rough, and that's the filament not the model
UPDATED
I had issues with the seal for my jugs, some I cut down the cap height. There are 2 new versions one is 5mm shorter than the original and the other is 6.2mm shorter. My jugs work best with the 6.2mm cap, printed at 101% with a peice of 1.5-2mm thickness rubber inside the cap