1 / 1
Dewalt Router for Kreg Adaptive Cutting System (the track saw- NOT ACCU-CUT)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits a DeWalt router and Kreg ACS track (NOT ACCU-CUT)
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 82
- Makes
- 0
- Views
- 559
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This fits a Kreg Adaptive Cutting System (ACS) track. This is the actual Kreg track saw - not the Accu-Cut, which is a jig for a circular saw.
If the fit is tight, use some wax, it should slide very smoothly.
I rounded the bottom circular standoffs to make it easier to slide on to a surface.
I jammed a little bit of tape in the back of the router slot to reduce the tiny amount of play that existed.
Supports are going to be rough, but print it with the circular standoffs facing up. I used tree supports and they came out easily.