1 / 2
Hue Dimmer Switch V1 Wall Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the wall mount that the original Hue Dimmer Switch V1 faceplate snaps into.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the wall mount that the original Hue Dimmer Switch V1 faceplate snaps into. You can screw it to the wall or 2 sided tape it on. It's designed to be exactly like the original and snaps right in.
Versions:
- V1 First upload (20-April-2025)
Print Instructions:
Bottom of plate
- Print so the bottom of the plate is on the bed. The little notches the faceplate snaps into should be facing down, with the large hole for the screws facing up. No supports needed.
- I printed at .2 but you can change to any quality you want.
- 3 or 4 Walls
- Infill 15%-20% (do as you wish... Less may be fine)
Post Processing: You might need to sand the edges. It should be snug enough to snap right in to the faceplate.