BentoBox v2.0 air filter for Qidi x-Smart 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A BentoBox base designed for Qidi x-Smart 3 printers.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 1
- Views
- 281
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn’t find a version that fit inside my printer, so I modified the fan base to be 10mm shorter and added a cutout on the right side. I also included a through hole at the back wall to allow mounting the base to the rear of the printer, using an M3x10 bolt. Additionally, I adjusted the holes originally intended for heat-set inserts, allowing M3 bolts to self-thread directly for securing the fans.
The fans enclosure, the hepa filter, and the carbon cartridge STL files are the same as in the original model https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo