VW Brake Piston Retraction Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple tool that fits the brake piston for most VW/VAG.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 47
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Should fit most of the calipers out there in the VAG family (VW, Audi, Skoda, etc). It fits a ½ inch shaft.
The images only shows a version with 3 pins but there is an additional pin added to support older versions of pistons as well.
Print with a stronger material like PETG, ABS or like me, a special reinforced version of PLA.
You need 4 M5 nuts to embed inside the model and 2 - 4 screws for the pins. I made the holes a little smaller to make them “lock” the screws in place if you use a length that is a little to long.
See images for use-case.
Update 2026-05-09
The attached file is now an STL-file.
Link to Onshape document if you want to make your own remix:
https://cad.onshape.com/documents/92f65f29f6aa33de6197fe11/w/9a5bd8382785b8699e5c81c8/e/2bfd4920710d2541c8be8b90?renderMode=0&uiState=69fec56cad443bca66baa056