Seatpost Mount Garmin Varia
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.31 – €1.60 net (excluding VAT)
For file: Garmin Varia Mount Mini_0.4n_0.2mm_PLA_MK4SMMU3_1h24m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.45 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.41 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A minimal mount to place the Garmin Varia (or compatible mounted rear light) to a 27.2 mm seat post.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 143
- Makes
- 0
- Views
- 2,051
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Minimal clamp to mount a Garmin Varia (or compatible) on a 27.2mm seatpost. It's a very tight fit and a tiny M3 x 5mm screw is used additionally, but very gentle.
I used PLA, 0.2mm structural and 3 perimeters. Organic support and 0% infill.
To be used with the original locking ring.