Raspberry Pi Zero 2 case w/HUB case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple RPI Zero 2 W case with holes for M3 screws. Has additional case for Vention dock. No inserts needed!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Raspberry Pi Zero 2 W case
I have RPI Zero 2 W and I hate it's lack of I/O. So I bought a Vention 5-in-1 USB-C eth. ver. dock for it.
The RPI Zero 2 would fit on top of the docking station, so I made a case for both of them.
You don't need to 3D print the HUB case, as it's specific for this dock.
This is my first creation that is public!
How to assemble
- Print “RPI CASE*” and “RPI HOLDER” [mandatory]
*Any case you need- Print “HUB CASE” and “HUB DOOR” [optional]
- Put M2.5 nuts inside the little grooves in “RPI HOLDER”
- Put your Raspberry Pi Zero 2 W onto the holder and screw it with M2.5 screws. - this secures it to the print
- Put your preferred RPI enclosure onto the RPI holder, it should sit flush.
- If you only want a case for RPI, then screw it with M3 screws** and enjoy!
- Insert your Vention dock inside of the “HUB CASE”. The walls around the hole for the USB A or C are tighter, so it will friction fit in there.
- Then take the “HUB DOOR” and cover the point insertion λ of the “HUB CASE” . ;)
- Now you can screw it all together with M3 screws**.
* = “RPI CASE”, “RPI CASE no cooling”
** = Your millage with your 3D printer may vary. You can either drill it or just force the M3 screw. Be careful with the leg on the RPI case where HDMI is. It has weaker leg as stronger one would interfere with the HDMI connector. You have been warned.
Made in blender