1 / 2
Stand for Popplock T14 by Rainer Popp — image 1
1 / 2

Stand for Popplock T14 by Rainer Popp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a stand to display Tricklock 14 by Rainer Popp.

Rating
0 / 5
Likes
6
Downloads
32
Makes
0
Views
160
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Tricklock 14 or Popplock T14 by Rainer Popp is prone to falling over when displaying it. This stand was designed to display the lock upright, and keep the key neatly together with the lock.

The file is optimized for multicolor printing. Use one color to print the body and plate, and another color (or several other colors) to print the letters. For an optimal result, make sure that in each layer, the letters are printed first, before the plate. After the print has finished, glue both parts together with cyanoacrylate (superglue), using the tabs to line everything up correctly.

I printed with 0.10 mm layer height and 15% grid infill, but you can experiment for yourself.