Cedar Plate Solving - Raspberry Pi 4 Compute Module 4 Enclosure CM4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for Raspberry Pi CM4 Compute Module to be used with Cedar Plate solving app.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v3.0
This is an enclosure for Raspberry Pi 4 Compute Module to be used with Cedar Plate solving app.
Cedar™ implements a plate-solving electronic finder for showing where in the sky your telescope is pointed.
https://github.com/smroid/cedar-server
There are two versions of this enclosure one with battery and one without.
Following hardware is needed:
Compute module 4 Lite - https://www.pishop.us/product/raspberry-pi-compute-module-4-wireless-2gb-lite-cm4102000/?searchid=0
Nano Base Board (A) for Raspberry Pi Compute Module 4 - https://www.pishop.us/product/nano-base-board-a-for-raspberry-pi-compute-module-4/
innomaker GS Camera Module with IMX296 Mono Sensor - https://www.amazon.com/dp/B093BY2TK2
2x #4 wood screws ½" (tapered)
4x #2 wood screws (flat)
4x M2 screws (for Imx296)
With battery:
EEMB Lithium Polymer Battery 3.7V 2000mAh 103454 Lipo Rechargeable Battery Pack - https://www.amazon.com/dp/B08214DJLJ
2-Pin SPST 2 Positions Round Rocker Switch Black Button https://www.amazon.com/dp/B07GKK5LKV
MH-CD42 Battery charger https://www.amazon.com/dp/B09XQB4J21
USB-C port https://www.amazon.com//dp/B0CHDRPKLD/
CM4-NANO-A has camera connected to cam0 port. follow wiki to change config from cam1 to cam0
https://www.waveshare.com/wiki/CM4-NANO-A
in: /boot/config.txt add line:
dtoverlay=imx296,cam0
Rings to hold the encosure are designed for M2.5 thumbscrews and 2.5mm thread inserts.