1 / 2
16-14 AWG In-Line fuse
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed In-Line Fuse housing
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a 3D Printable In-Line Fuse. It works by you inserting two wires 14-16 Gauge that have all-metal female spade connectors on the ends that will go into the plastic fuse housing. You can then use a soldering iron set to a high temperature inserted into the round part of the female spade connector to heat it up to allow it to fit in snugly into the plastic housing, very similar to a heated insert. let it cool off fully before using, and it's recommended to use a higher temp rated filament for the housing; Atleast PETG.
