3DP Model Rocket Launch Pad w/ Adjustable Leg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed model rocket launch pad built to last! With an adjustable leg for leveling and/or aiming your rocket into…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A 3D printed model rocket launch pad built to last! With an adjustable leg for leveling and/or aiming your rocket into the wind. Designed for use with standard 1/8" or 3/16" (Maxi) sized rod for fun with ALL sized rockets. Very little hardware will be required to finish this launch pad.*
BOM-
A)1x- 1/8" x 24" rod B)1x- 3/16" x 48" rod (optional) C)1x- 1/4" Keyless Chuck D)2x- 1/4-20 x 1" bolt (hex or allen cap) E)1x- 1/4" ID nylon washer F)1x- 1/4-20 nylon insert lock-nut G)1x- 3mm x 0.5mm x 20mm bolt (hex or allen cap) H)1x- 1/2" OD toothed lock-washer (min. 3mm ID) I)1x- 1/2" OD fender washer (min. 3mm ID) J)1x- 3mm x 0.5mm wing-nut K)1x- large tin can lid (coffee cans size ideal) L)3x- 1/4-20 x 3 1/2" bolt (hex or allen cap) (optional)M)3x- 1/4-20 nylon insert lock-nut (optional) N)3x- 1/4" ID split-lock washer (optional)O)3x- 1/4" ID flat washer (optional)
*Note- Print "Main Leg" twice. **Note- Optional hardware for bolting launch pad together, otherwise the launch pad snaps together and may be glued for permanent installation.
Category: Hobby