1 / 1
Led holder - WS2812 - ImpulseRc MICRO APEX 3"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This protective LED cover fits on the underside of the ImpulseRc apex micro frame. Clear PETG allows LED to disperse!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This protective LED cover fits on the underside of the ImpulseRc apex micro frame. Clear PETG allows LED to disperse!
If you want to add LED's to your fpv drone you can do so by soldering these to the LED pin on your flightcontroller. This cover protects the WS2812 leds (2 in my case) while also allowing the light to disperse in the plastic of the print.
Cover can be mounted using the factory screws which are used to hold in the standoff of the frame.
Materials:
- Clear PETG
- 2 WS2812 LED's
- 3 x 5cm wires