Bait Jar for Crab / Shrimp / Crawdad traps
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.02 – €4.91 net (excluding VAT)
For file: Bait_Jar_0.4n_0.2mm_PETG_COREONE_4h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.47 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 4.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A screw top container to fill with your favorite bait / attractant for crabbing/shrimping.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 190
- Makes
- 0
- Views
- 583
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
UPDATE: The .stl file now has the slot in the tab!
This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc. The .stl file does not have the negative part which creates the slot for the zip-tie, so you will have to add that in your slicer (see photo). The 3mf file and g-code file has the slots. I printed with 2 perimeters, .2 layer, and 10% grid infill. I'm sure all of those can be modified to suit. Please let me know if you have any questions or comments, and post some pics of your make! Thank you.