Parametric vape blow adapter. Fog-machine out of Vaporesso pod kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make a tiny battery-powered smoke machine out of cheap vaping device. Parametric model, default fits Vaporesso Armour GS
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Make a tiny battery-powered smoke machine out of cheap vaping device.
Fit the adapter around air intake ports of a vape and blow into it for the fog to come out of mouthpiece. Optionally attach a 12mm PVC or silicone pipe to the mouthpiece to direct the fog where you need it, which also cools it down and makes it less turbulent.
The fog machine be used to find air leaks during exhaust or intake repair of a car, as fog effect during photo or video shooting, maybe also for pranks.
The adapter can be printed without supports, no overhangs are more than 45 degrees.
Parametric model is written in OpenSCAD. The default parameters fit Vaporesso Armour GS. I fuel it with pure glycerine. There is an optional mounting points for a tightening screw if you print it with TPU to make it more airtight around the ports, I did not test this option, I'm happy with not quite airtight part printed with PLA, it's good enough for my use.