Sailor_Moon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The beautiful girl Sailor Moon!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: SailorMoon_01.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 137x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA 3DHoJor Blue Transmission Distance: 2.9
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Cyan Transmission Distance: 0.1
This print uses 7 unique filaments
Swap Instructions for one AMS:
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Blue (Slot2)
At layer #9 (0.8mm) swap to Orange (Slot3)
At layer #11 (0.96mm) swap to Red (Slot4)
Pause at layer 14 to allow color swap:
Slot1: Black --> White
Slot2: Blue --> Yellow
Slot3: Orange --> Cyan
At layer #15 (1.28mm) swap to White (Slot1)
At layer #18 (1.52mm) swap to Yellow (Slot2)
At layer #22 (1.84mm) swap to Cyan (Slot3)
At layer #23 (1.92mm) swap to White (Slot1) for the rest.