Minimalistic Headphone Holder - 40 minutes print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalistic under desk headphone holder with crisp magnetic snap for a clean look of your desk and satisfying fidgeting
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Minimalistic under desk headphone holder with crisp magnetic snap for a clean look of your desk and satisfying fidgeting.
After browsing some headphone holder designs, I realized none of them fitted the minimalistic look I was going for my desk. So, I went on to make my own and ended up being also a great fidget toy because of the crispy magnetic snaps.
This headphone holder slides in and out of sight with magnetic crispy snaps both when retracted and extended.
It prints in just around 40 minutes and uses only 18g of filament.
You will need two counter-sunk wood screws with a minimum length of 20 mm (maximum depends on the thickness of your desk, choose the screws carefully so they do not come out through the surface of your desk). I have not tried double sided tape – the base should have enough surface area to allow mounting with double sided tape, however I cannot guarantee it will hold the weight of the headphones.
2x Screws min 20mm long
You will also need 4 magnets:
- For the extendable tongue you need two ⌀5mm x 2mm depth magnets
- For the base you need two ⌀5mm x min. 2mm depth magnets (if you want it snappier you can get deeper magnets up to ⌀5 x 5mm depth)
The magnets are meant to be pressed in, so expect a bit of resistance. Recommended to use a tool like a vice, a pair of plyers or ideally a mini press if you have. The magnets should also be pressed until under the contact surface of both parts for best sliding experience.
The corresponding magnets should be mounted in the base and extendible tongue so that they attract each other, only then the snap feature will work!