1 / 2
(Ulanzi) AT-05 CAP
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cap that came with the product only protected the screws, so I designed a cap to protect the tip of the light stand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a cover over the tip to avoid contact with people or other equipment when moving the light stand.
Support material settings are required when printing.
Since there is a 1/4 screw inside, a pitch of 0.15mm is recommended.
The wall is assumed to be 3.
It may also work with other similar products, but I don't have them on hand so I can't verify.
Ulanzi AT-05 https://amzn.to/4iq6mUx
Material: PLA, etc
Pitch: 0.15mm
infill: 15% or more
Wall: 3
Support: Need
Brim: Better