SEGA Dreamcast USB-c PD Board Power Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SEGA Dreamcast USB-c PD Board Power Mod Uses HW-398 Black PD board with 9v-20v max 5a
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 67
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SEGA Dreamcast USB-c PD Board Power Mod Uses HW-398 Black PD board with 9v-20v max 5a
Uses HW-398 Black PD board with 9v-20v max 5a
I like these boards because they are 5V-20V, so they can be used for most consoles. it will snap into place and not move an inch. It is a very tight fit so that it does not move when in use.
I used this to mod a ReDream PSU mod by RexusNexus so that it used an USB-C PSU rather than a barrel jack.
Unfortunately https://www.printables.com/model/1117980-dreamcast-pd-power-delivery-usb-c-board-mod seems to be too thick and the USB-C connection does not go all the way?