Corsair 6500X vertical GPU Mount (dual slot GPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a vertical GPU holder that can holt a dual slot GPU and uses the standard opening of the case without modifying it.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 122
- Makes
- 0
- Views
- 1,490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
i was not able to purchase the official vertical GPU mount from corsair as they have an annoying error on their homepage. after contacting support they concluded that this holder cannot be shipped to my location ….. yeah…i dont think so. so i had to made one by myself.
it works, i like it, but it could be cooler.
BOM
1 pc ~170 - 220mm Pcie Riser - be careful to take the correct version needed for your GPU!
220mm is a bit too long but it works
170 mm may be too short / have not tested yet
be careful the model is designed for a mounting hole distance of 125mm! see pictures !
i used: Phanteks GPU-Bracket II + PCI-E 4.0 x16 Riser
2 pc M3x20 cylinder head to assemble part 1 and part 2
2 pc M3x8 cylinder head to mount the GPU to Part 2
2 pc M3x18 cylinder head for mounting the riser to part 2
4 pc M3ns (DIN 562)
2 pc M3 hexnut
Assembly instructions should not be necessary.
Feedback is very welcome, this is my first computerpart that i designed. if you have any wishes or improvements, please let me know
final hints:
if you want to use another riser - yeah use that! → change the dimensions in drawing “Mounting Riser Part 2”
in my version one port is not usable, that means that you may also not be able to use it (depending on your GPU) - no problem → change the dimnensions in drawing “GPU PCIE slot cover”
you want a custom design for your cover? → no problem → edit part 3 to your necessities.