Knafs Lander 2 Clip Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Clip Insert for the Knafs Lander 2. It may fit other models as well.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a Clip Insert for the Knafs Lander 2. I only have the Lander 2 but it looks like this would fit the other Lander models as well. There are right and left versions with a radius to match the G10 scales. Unlike the stock model, this Clip Insert extends to the edge of the scales for a cleaner look. However, it may not work well on the non G10 scales or other 3rd party scales with a different profile/radius.
Depending on the desired result, you can print this face up or down. Initially I tried printing face up with ironing to try to match the original but eventually landed on printing face down on a textured PEI plate. I used .07mm layer height, .4mm nozzle, and 2x bottom layer flow on my Sovol SV06.
There are tight and loose models attached. The chamfer on the loose model is .1mm wider than on the tight model. I used the loose model on my SV06 but printers with tighter tolerances can probably use the tight model.