1 / 3
ZYN Dispencer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ZYN dispencer for up to 10 ZYN boxes
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 80
- Makes
- 0
- Views
- 933
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A ZYN dispencer wich you can bolt to your desk for optimal reach of your ZYN while working.
All were printed in normal PLA on normal settings on my P1P Bambu lab Printer.
For the inside cylinder i suggest putting a brim, i used a 20mm brim.
The mounting holes are M4.
You can also print a normal spring, wich you can attach at the end, so that your ZYN is spring loaded and your box is ready to use.