Syringe Adapters for Prodigy Cell Handling System
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.24 net (excluding VAT)
For file: Syringe Insert Adapter 10mL_0.4n_0.2mm_PLA_MK4S_12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy print adapters to clamp syringes to the Miltenyi Prodigy cell handling system
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
An insert to allow the clamps on top of the Miltenyi Prodigy to accept syringes. Print can stay in place, and syringes can then be clipped in and out of the system as needed. I printed in PLA at 0.2mm height with a 0.4mm nozzle. No supports. Tab on the adapter denotes what size syringe it can accept.