1 / 1
Yaesu FTM-100DR Faceplate / Trunnion for 10" rack — image 1

Yaesu FTM-100DR Faceplate / Trunnion for 10" rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is faceplate / trunnion to hold a Yaesu FTM-100DR into 10" rack.

Rating
0 / 5
Likes
4
Downloads
13
Makes
0
Views
222
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a faceplate / trunnion for a Yaesu FTM-100D to hold it into a 10" rack.  I based this on the 10" rack that many homelabbers are using for Ubiquiti gear.  I thought a 10" rack would be perfect to hold two way mobile radios.  This trunnion may fit other Yaesu radios, but I have not tried it with any others.

This fits on the Prusa MK4, but it does max out the bed.  When you load it into Prusaslicer, you will need to rotate it 90 degrees. I printed with 40% gyroid infill and it does not require any supports.