Rock Lee Manga Panel Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge Manga Panel form Naruto, Rock Lee opens the third gate in the chunin exame
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
One of my favourite moments of the chunin exams, just ranking after the moment where Lee took off the ankle weights.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120.73x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.