Magnetic Vice Soft Jaws – Customizable Inserts for Drill Press Vices (3" Default, STEP File Included)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic soft jaws for 3" drill press vice. Customizable via STEP file. Fits 12×3mm magnets. No supports needed.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 40
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These magnetic soft jaws are designed to protect delicate workpieces in a drill press vice, improving grip while preventing damage. They snap firmly into place using embedded magnets for quick install and removal.
There is one jaw face designed for holding objects vertically or horizontally and another that will allow you to clamp at any angle.
Sized by default for a 3-inch (76.2mm) drill press vice and 12mm × 3mm round magnets, but all key dimensions are fully customizable using the included STEP file. Adjust width, height, magnet size, and jaw geometry to suit your own equipment.
Designed for easy printing with no supports required. PETG or TPU would be better than PLA.