Ball in cube / Koule v kostce
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.48 – €3.03 net (excluding VAT)
For file: cube_0.4n_0.2mm_PLA_MINIIS_2h23m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.75 excluding VAT (range midpoint).
- Weight reported by the author
- 42 g
- Print time reported by the author
- 2.39 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ball in cube / Koule v kostce
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Ball in cube
I made several holes through the ball.
First print the ball, supports are needed.
Then print the cube, pause at a height of 65mm and insert the ball.
I fixed it with tape so that it does not move during the next print.
I used a variable layer height to print the ball.
The bgcode files have a print pause in them.
Enjoy
Koule v krychli
Do koule jsem udělal několik děr skrz.
Nejdřív vytisknout kouli, jsou potřeba podpěry.
Potom tisknout krychli, ve výšce 65mm dát pauzu a vložit kouli.
Já jsem jí fixnul páskou, aby se nepohybovala při dalším tisku.
Na tisk koule jsem použil vatiabilní výšku vrstvy.
Soubory bgcode mají pozastavení tisku v sobě.
Užívejte