Gaggia classic scale extender for Acaia Pearl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the Acaia Pearl to be put under the GCP to give more room for tall cups.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 59
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Under machine scale riser made for Acaia Pearl and Gaggia Clasic Pro. Printing in Petg or ABS are my recommendation. If printing with a single material printer all parts should import the intended orientation, if using multi-material I recommend flipping the legs upside down and using dedicated peelable support or using petg as peelable support for abs print.
Intended for use with @Loogle low profile drip tray
https://www.printables.com/model/869987-low-profile-drip-tray-gaggia-classic-pro-eco-evo
The front feet on the Gaggia are replaced with the pins, this should be a tight friction fit to both the legs and the Gaggia. The rear feet sit in the legs.
You will also need self-adhesive nonslip tape for the bottom of the legs, I like the “silicone furniture pads” available on amazon.
in the fusion file the Parameters are:
scaleH the length of the riser between the top and bottom, add 16mm for overall height. This can be changed if using a different drip tray.
scaleW This is the depth and width of the riser, will not change the pattern of the drain slots so they will need to be readjusted if you change this.
pin_riser_clearance adjust larger if the pin is too tight to the legs.
pin_gaggia_clearance adjust larger if the pin is to tight to the Gaggia.