Easter Bunny Clicker & Keychain (Separated Parts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easter Bunny Clicker & Keychain (Separated Parts)
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 268
- Makes
- 0
- Views
- 708
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
💰You can access the commercial license anytime by joining my Patreon at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same tier before May 31, 2025—so don’t miss out! 🎉
🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit isn’t quite right, please adjust the size as needed.
🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.
🔔This model requires keyboard switches to function properly.
🔔Support is required for this model to ensure proper printing. Specifically, support for the bottom of the eggshell is a must.
🔔Printing in 0.15mm layer height is recommended.
🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.
🔔Add brim or apply glue to the bottom if extra adhesion is needed.
🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.
❗Please do a test print to ensure quality before starting a mass print.
🙌This model is made available to you by UniQrint paid members.