1 / 6
Toothpick case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a toothpick box that, when opened spreads the toothpicks so that you can take one without touching all the…
- Rating
- 2.5 / 5
- Likes
- 27
- Downloads
- 149
- Makes
- 1
- Views
- 1,118
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a toothpick box that, when opened spreads the toothpicks so that you can take one without touching all the others, and thus avoids spreading viruses.
Designed in OnShape:
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
38
Filament:
Generic PLA Blue and Yellow
Notes:
The print is quite straightforward. No supports required.
The overhangs in the horizontal rails inside of the case may need a bit of trimming.To assemble:
- screw the cover to the top of the axis.
- screw the piston to the bottom of the axis.
- insert the piston into the case, aligning the 3 notches and rotate 1/8 turn to the left. It should fall into place by itself.
Category: Kitchen & Dining