1 / 4
spool holder for 1KG of filament
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
spool holder for 1KG of filament to safe your'e filament nice and secured.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This holder is designed to be easily mounted to a cabinet or wall using M4 screws. The design is robust enough to support multiple spools without bending, and the spools can be easily placed and removed.
Features:
- Material: PLA
- Mounting: Four mounting points for M4 screws ensure a stable installation.
- Design: Strong and practical, perfect for keeping filament spools organized.
- Usage: Spools can rotate for easy filament unwinding.
3D Printing Tips:
- Layer Height: Use a layer height of 0.2 mm for a good balance between print quality and speed.
- Infill: Set the infill density to at least 20% for strength, but consider increasing it to 50% for added durability.
- Wall Thickness: Use a wall thickness of 1.2 mm (3 perimeters) to ensure the holder is sturdy.
- Print Speed: Print at a moderate speed (around 50 mm/s) to avoid any issues with layer adhesion.
- Supports: Depending on your design, you may need supports for overhangs. Use removable supports to make post-processing easier.
- Bed Adhesion: Ensure good bed adhesion by using a heated bed set to 60°C and applying a thin layer of glue stick or using a PEI sheet.
- Cooling: Use a cooling fan to improve print quality, especially for the top layers and overhangs.
- Post-Processing: After printing, you can sand the edges and surfaces for a smoother finish.
This holder provides an efficient way to keep your filament spools organized and accessible.