1 / 2
Wall Mount for Shimpo Banding Wheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wall mount fits the Shimpo BW-22LC banding wheel.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount for the Shimpo BW-22LC banding wheel and any others which share the same base dimensions.
I recommend 4 walls and 30% or higher infill for good stiffness and strength.
Recommended print orientation is vertically as in the STL with no supports. This will maximize the strength of the flange against outward pulling forces.
The mounting holes are 5mm diameter, and are designed for a #8 screw with a flat-bottom head to keep from splitting the layers.