Filament Dryer Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple filament guide based on the Comgrow/Sovol SH02 Dryer but will probably fit others.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Photo shows it on an angled fitting but it should be usable without it. Can be used for different orientations and angles.
I wanted to feed to the printer from above but the friction in the stock setup was to high sometimes snapping filament. I tried to get it working with a modified angle setup https://www.printables.com/model/1035587-comgrowsovol-sh02-dryer-filament-guide-fix but for various reasons its limited to 30-45deg.
In reality all it needs is this simple guide though the angled adapter does help with internal filament alignment.
If there is any interest it might be worth doing a less extreme (dificult to fit) angled adaptor and various angled flexy guides. Let me know.
Printing:
- It might be easier to print arm standing up but it is worth printing it on its side as it will be a lot tougher in bending. A lot of flex is built in.
Update:
- Jul'25: Added chamfer for better fit to SH02 and ellimate flex load that snapped thread if over tightened. Improved thread for easier fitting of nuts.
- Apr'25: Strengthened the thread and slightly reduced angel on the angled guide. Should be a lot simpler to install and stronger. The extreme angle tended to load up thread and snap it.