radax 3c case for openIPC FPV ground
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A box for placing the openIPC FPV ground terminal, with a built-in RTL8812EU network cable card and external antenna int
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A box for placing the openIPC FPV ground terminal, with a built-in RTL8812EU network cable card and external antenna interface, built-in 18650*2 battery and charging port, and a sliding door on the charging port. There are corresponding LED (5MM) indicator positions for power on and charging. In addition, a 2.5*2.5 cooling fan position is reserved, which can be installed as needed. If using ruby fpv firmware, there are buttons on the side, and 4 buttons are made here. The SBC board is radax rock 3c.