Fatman Nuke with Magnetic Nose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of khattoum's great Fatman nuke model with a magnetic nose. I also sized each part of his model to…
- Rating
- 5 / 5
- Likes
- 232
- Downloads
- 363
- Makes
- 3
- Views
- 4,318
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
This is a remix of khattoum's great Fatman nuke model with a magnetic nose. I also sized each part of his model to 80%.
You will need 8 neodymium magnets measuring .25" in diameter and .06" thick. I used these ones; https://www.microcenter.com/product/455323/master-magnetics-magnets-with-adhesive-back-n-s-25-wide-12-pieces I just removed the adhesive backing. For the nose cone, they are completely contained in the nose. To insert them, I set up a layer pause and put them in before the layer which would cover the holes started.
The nose and upper half are the two I modified. Everything else is the same, just scaled down to 80%. At this scale, the tail is approximately 4.75" square, and it stands around 10.25" high
Category: Props