F-mount/C-mount lens coupler / telescope / beam expander
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an optical mount which allows the coupling of a Nikon F-mount lens to a C-mount lens. The spacing between the…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 0
- Views
- 720
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
This is an optical mount which allows the coupling of a Nikon F-mount lens to a C-mount lens. The spacing between the mounts matches the combined flange length of the F and C mount lenses, so that the focal point of each lens is in the same plane. As a result, with both lenses focused on infinity, connecting two lenses with different focal lengths with this coupler is a simple way to create a telescope or laser beam expander.
The model includes multiple holes suitable for attaching M6 threaded screws, and 4 foles on the F-mount side allow the insertion of alignment rods (e.g. Thorlabs cage rods) to simplify alignment of multiple telescopes. The F mount side includes a notch for the aperture lever for Nikon lenses without an aperture ring.
The attached photographs show the coupler with a 12mm Edmund Otpics lens attached to a 50mm Nikon AF-S 1.8G lens.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
Notes:
The model prints well with support when printed with the C-mount side on the bottom. If the slicer allows, place a support blocker in the mount holes as support isn't needed here and removal can be tricky (PrusaSlicer allows the insertion of support blocker for example).
We printed this with a 0.6mm nozzle, but there should be no problem with a 0.4mm nozzle instead.
Category: Physics & Astronomy
