ArmoredTurtle HTLF "frame_right" modified for USB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reworked right_frame part to accomodate using a BTT MMB via USB
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 0
- Views
- 945
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I built an ArmoredTurtle HappyTurtleLettuceFeeder using a BTT MMB (v1.1) for the control board. I wanted to use it via USB but as most will use it with canbus, the opening did not allow for USB cable to be inserted.
Works well but do noe that you will have to use a shorter M3 heatset insert (M3x4x5) and M3 SHCS (M3x6mm) for the insert that would be under the USB cable. I would advise being careful of the depth when setting that shorter insert as there is no linger a lip on the back to stop it. I have included the STEP file in case someone needs to further modify it.
I home this will save someone a bit of time in the future. Many thanks to the Armored Turtle team for all the hard work that they put into this and other projects.