1 / 4
Stealthburner UHF Front cover with eddy mount for Dragon ACE UHF
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the stealthburner which helps you mount a btt eddy, without the plastic shell around it
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Mounting the eddy, you will need 2xM3x6 bolt, and be careful because they are self-tapping in the plastic
Eddy is mounted so that the sensor is just 2.5mm above the bed with the scanning, if you want to modify it, keep in mind the thickness of the original shell (1.5mm)
Y offset it: -16.074
Probe points for QGL with this config are points:
80,25
80,290
230,290
230,25
You will also need to cut into the hotend mount for the cable. The dragon ace UHF mount included!