1 / 3
Wall Mount for Merkur Futur Razor — image 1
1 / 3

Wall Mount for Merkur Futur Razor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wall mount designed for the "Futur" Razor by Merkur.

Rating
0 / 5
Likes
1
Downloads
24
Makes
0
Views
68
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this mount specifically for my razor after measuring it, so it fits nicely and securely although it has very little contact area (it kind of “levitates” in the middle). I was going for an almost minimal design to be able to see much of the razor while mounted and also for it to dry faster, plus it saves material.

To mount it, I used a double sided adhesive tape but first sanded the contact area on the mount a bit and cleaned the one on the wall with alcohol.

The piece in the pictures has been printed with a 0.3mm nozzle and a layer height of 0.08 mm but this was mainly for testing the nozzle. It is more than strong enough with PETG but any filament will be fine, I guess.