Strong Towel Hook/Clip - Remix

Searched for a while to find the ideal towel clip/hook to mount on the front of a Proaim Camera Assistant Front Tray, that could hold the microfiber towels I use for cleaning parts before photographing them. Tried a bunch of standard towel hooks, but the towels would fall off relatively easy when moving the wheeled stand the front tray is mounted on. I tried some v-shaped towel hooks but they either took a while to print or just didn't hold the microfiber towels really well. I tried a few towel clips, but those required two hands to get the clips open to hold the towel. I eventually came across this towel hook and after a quick remix in Tinkercad to get rid of the mounting holes, I now have the perfect towel hook for my front tray. 

Details:

• Adhesive: 3M ½" Double-Sided Adhesive Tape

Print Settings: 

• Print part on its side
• Material: PETG for flexibility 
• Nozzle: 0.4mm
• Layer Height: 0.2mm-0.3mm
• Infill: 5%
• Wall Count: 2-3 
• Top/Bottom Layers: 3-4
• Supports: None 

Notes: 

• I've printed a handful with 2, 3, and 4 walls. 4 walls tend to make the clip not as flexible, but still useable with thinner microfiber towels. 2 or 3 walls was the ideal range for the microfiber towels I use. I can easily pull a towel off the clip, use it, and with one hand pull the towel back into the clip.