World's most generic webcam holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Want to add a camera to your printer quick? Strap a camera to this with zipties and bolt this to the 40x40 extrusion.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Want to add a camera to your printer quick and dirty?
Don't care about levelness?
Strap a camera to this with zipties and bolt this to the 40x40 extrusion.
Or just print the step stool and put the camera anywhere.
The circular slots fit M3 screws just right, allowing you to rotate the holder to direct the camera if you attach it a extrusion using M3 T-Nuts.
Camera on the picture is a cheap ESP32 S3 with Prusa's camera firmware.
With zipties and sometimes tape you can fit just about any camera to it with a little creativity.